运用模式分类的雷达抗转发式距离欺骗干扰方法

针对雷达转发式欺骗干扰中的距离欺骗，提出了一种基于模式分类来识别目标与干扰的方法。该方法基于干扰和目标能量和起伏特性差异确定提取特征因子，再利用RBF神经网络方法进行分类。仿真结果表明，该方法具有较好的抗距离欺骗干扰性能。     

地震属性神经网络油气模式识别技术及其在东海的应用

神经网络油气模式识别技术是综合利用地震属性进行油气预测的技术之一 ,它首先通过计算获得多种地震属性 ,综合分析找出对储层油气比较敏感的地震属性组合 ;然后收集油气井与非油气井的井旁道地震属性 ,组成学习样本并进行神经网络学习 ;最后利用学习结果对储层进行油气预测。该技术在东海某工区的应用结果表明 ,振幅统计类和复数道统计类地震属性是对该地区储层油气最敏感的地震属性组合。神经网络油气模式识别技术可以作为东海地区储层油气预测的一种手段。     

消失模铸造模成型机的特点及应用

介绍了消失模铸造工艺对成型机的特殊要求,高性能成型机在大规模工业化消失模生产中的重要性,重点阐述了德国Teubert公司TVY130/90消失模成型机的特点及应用,并对成型机的国产化研究与开发提出了建议。     

Magnetic Resonance Visualisation of Flow and Pore Structure in Packed Beds with Low Aspect Ratio

Different NMR techniques were combined to obtain the structure and velocity information for a systematic investigation of fixed beds with low aspect ratio (tube diameter to particle diamter, d_t/d_p) in the range 1.4 to 32. The structure of the void space was determined for a variety of packed beds of glass beads or regular and irregular porous pellets by magnetic resonance imaging (MRI). Based on the images the radial distribution of the voids within the bed was obtained. Ordering effects were found even for non‐spherical and polydisperse particles, and a maximum of the fluid density near the tube wall was confirmed for all pellet geometries and sizes. By combining MRI with velocity encoding, velocity profiles and distributions of flow velocity components of a single fluid phase through packed beds have been acquired. The radial velocity distribution follows an oscillatory pattern which largely reflects the ordering of the particles, which can be accessed from the density distribution of the interparticle fluid. Maximum velocities of up to four times the average value were found to occur near the tube wall. This wall effect was observed for all but the smallest particles, where the aspect ratio was d_t/d_p = 32. Moreover, a visualisation of flow pattern in the presence of packed particles was achieved by using a tagging technique, and the stationary flow field could be identified for an experimental time of several hours.     

超高强度钢连续冷却组织和时效反应的研究EI

观察分析了冷却速度对低合金超高强度钢（４０ＣｒＭｎＳｉＭｏＶＡ）精细组织的影响。结果表明，在冷却、低温等温（或回火）过程中，钢显微组织中的马氏体或贝氏体存在时效阶段。其组织特征为呢纹花样。α和ε间的取向不满足Ｊａｃｋ关系，它属一种新的取向关系。过渡型碳化物可直接从呢纹花样区析出。     

消失模生产中应用表面光泽涂料防止球铁件产生夹渣缺陷

以汽车弹簧托架为实例，分析用EPC法生产球铁件时产生夹渣缺陷的原因，提出采用表面光泽涂料可有效防止夹渣缺陷的产生，同时亦可改善铸件表面粗糙度。     

坪北特低渗透油田加密调整效果数值模拟评价研究

坪北油田属低孔、特低渗储层,2002年完成整体部署,2003年进行了局部加密调整,取得了较好效果。在综合地质研究的基础上,利用数值模拟方法,结合经济评价手段,对其加密调整效果进行了评价,认为加密后水驱储量提高,新增可采储量效果显著。     

一种基于Web文本聚类的用户兴趣发现模型的研究

研究了一种基于Web文本聚类的用户兴趣发现方法．他通过Web文档信息获取，文本的形式表示，以及Web文本聚类方法最终提取用户兴趣知识，并给出了一个设计模型。     

借鉴德国,思考我国节能建筑设计

节约能源和保护环境是德国政府开发利用能源的一贯政策。德国特别重视建筑的节能,并收到了很好的效果,很多经验值得我们借鉴。从建筑节能设计角度分析,认为我国在建筑节能设计时,不应该简单复制节能建筑,应当变革现有的设计模式,从建筑的寿命周期着眼,系统运用高新技术,使建筑技术和建筑艺术相融合,并得到政府的支持。     

Approximating the problem, not the solution: An alternative view of point set matching

This work discusses the issue of approximation in point set matching. In general, one may have two classes of approximations when tackling a matching problem: (1) an algorithmic approximation which consists in using suboptimal procedures to infer the assignment, and (2), a representational approximation which involves a simplified and suboptimal model for the original data. Matching techniques have typically relied on the first approach by retaining the complete model and using suboptimal techniques to solve it. In this paper, we show how a technique based on using exact inference in simple Graphical Models, an instance of the second class, can significantly outperform instances of techniques from the first class. We experimentally compare this method with well-known Spectral and Relaxation methods, which are exemplars of the first class. We have performed experiments with synthetic and real-world data sets which reveal significant performance improvement in a wide operating range.